NetMarket USA

If you don’t want to disassemble your shelving unit to adjust heights, Simplastics chrome wire shelving is for you. Plasticstorage.com is certainly goingto stock what you are looking for. With wire shelves in a large variety of sizes and many heights to choose from, you can make wire shelving units from short units at table heights to 7 foot tall rack systems. Each of the wire shelving can hold anywhere from 400 lbs. to 600 lbs. per shelf. Shelves up to 48” can support 600 lbs. per shelf and shelves ranging in length from 54” to 72” can handle 400 lbs. With that being said, we surely don’t recommend that you take a 400 lb engine block and place it in the middle of the shelf.

So, you ask where is the wire shelving unit’s flexibility visible? Using the plastic split sleeves, shelves attach to the posts at 1′ increments.. You can move the middle shelves up or down without having to take off the top and bottom shelves.

The versatility of the wire shelving does not end with the 4 posts and the shelves alone. You can insert a set of casters into these wire shelving units to mobilize them..

Plasticstorage.com makes available caster sets with a wheel diameter of 5”, the wheels swivel and 2 of the casters also contain brakes. For those worried that their cart might hit and/or damage the doorways or walls? Plasticstorage.com sells “donut-shaped” rubber bumpers that cushion the impact.

If you’re worried that your stuff could fall off of the sides or back of the shelves? Wire Shelving units from Simplastics can be sold with ledges for the sides and back. In fact, you can even use a back-ledge on the front of a shelf if you so choose.

You can use the wire shelving units in store rooms, kitchens, class rooms and if you’re a contract manufacturer in the semiconductor or electronics business and must protect your product from electrostatic discharge? Plasticstorage.com has ESD conductive casters available, along with ESD conductive drag cables that enable you to ground the unit. The last item needed to complete your wire shelving unit as a ESD safe unit, is the replacement of the plastic split sleeves with aluminum split sleeves that effectively ground the shelves vi a the posts and the ESD drag cable.

Does your project entail erecting storage shelves in an entire storage room or warehouse? Start with a starter unit and then add add-on units as you see fit. The advantage is that you get to use existing posts from a previous unit, to support the shelves of the next unit. Add-On units can not be made mobile.

If you feel that you are still missing information or need help making a product decision? Call us at 1-800-966-9090 or visit http://plasticstorage.com